All Septic Services offer a wide range of Septic Pumps and air blowers and stock the only only genuine chamber block kits of the Hiblow Sakuragawa GJL air pumps and blowers left in Australia As well as Hiblow XP80, HP80, Techno Takatsuki, Thomas AP-80 to name a few!
Good news for biocycle and earthsafe owners
During the 1980s and 1990s biocycle and earthsafe sold thousands of the Hiblow sakuragawa GHL air blowers.
All septic services has just purchased the only remaining stock of genuine chamber block kits of the Hiblow Sakuragawa GJL air pumps and blowers left in Australia. Production of these blowers ceased in 1997 and spare parts were being produced up until recently.
We have also developed an after market actuating rod ensuring your Japanese made blower can now be repaired with genuine parts with more trouble free years to come without having to purchase inferior Chinese made air blowers.
Septic Pumps and Air Blowers currently available:
Sakuragawa GJL and GJH air pumps and blowers ceased production over 12 years ago and spares were to be phased out a few years ago, we have managed to continue supply and will do so as till such time as all spares have been exhausted.
It has been over a decade since Techno Takatsuki started the sale of Hiblow linear air pumps and blowers. They firstly developed the magnetic linear diaphragm type air pump and blower in Japan and have built a firm position as a pioneer in this industry. Techno Takatsuki has produced more than 6 million Hiblow air pumps and blowers used in various fields such as medical, home appliance, aquarium, septic tanks, and wastewater treatment systems.
Techno Takatsuki Hiblow HP-80 linear air pump.
The Techno Takatsuki Hiblow HP-80 linear air pump is covered by a 2 year warranty. This type of linear air pump is often referred to as a septic air pump, septic air blower, septic aerator or septic air compressor.
NEW Hi-Blow XP80
The NEW Hi-Blow XP80 is manufactured in Japan by Techno Takatsuki Corporation and produces 80 L/min of air suitable for use in water treatment systems such as the Envirocycle or similar. We are often asked to supply a replacement air blower pump for clients with a water treatment system and the XP80 is designed for this task. Supplied with a 2m cable and 3-pin plug to Australian Standard, it is ready for installation using the 16mm tube outlet. Improvments over the HP80 include around 30% improvement in efficiency which means it uses less electricity. The warranty for the XP80 is a massive 3-years and this is a direct replacement for the HP80.
Thomas AP-80 linear air pump. The Thomas AP-80 linear air pump is the most economical low energy septic air pump currently available in Australia with a rated power consumption of only 51 watts. It is the number one selling pump in Europe known for providing the lowest running cost per litre of air @ 15-18 kPa. The Thomas AP-80 linear air pump is covered by a 2 year warranty. The Thomas AP-80 linear air pump is also branded as a Yasunaga AP-80 linear septic air pump. This type of linear air pump is often referred to as a septic air pump, septic air blower, septic aerator or septic air compressor.
Nitto Medo LA-80B
Nitto Kohki Medo LA-80B linear air pump. The Nitto Kohki Medo LA-80B linear air pump comes with 12 months warranty. Up to 12 months additional warranty may be offered at the discretion of the manufacturer to some OEM’s for use in new system installations only. This type of linear air pump is often referred to as a septic air pump, septic air blower, septic aerator or septic air compressor.
The Pumpmaster range of shallow depth drainer pumps were selected to suit a wide variety of applications. These include, from clean water through to raw sewerage, from plastic cased suitable for domestic/light commercial installations through to stainless
steel and solid cast construction.
Our smallest drainers are built to the same high standards as our biggest pumps, with mechanical specifications to ensure a long working life.
Typical of these are:
The heart of the pump. All ʻSumpmateʼ feature dual or triple seals with either one or two being mechanical and an additional lip seal to exclude abrasives. The seal chamber operates in an oilbath for lubrication of the seal contact faces, with the majority of these being in double-faced, silicon carbide material.
High grade stainless steel, running in quality, sealed ball bearings.
All single phase motors have in-built thermal, auto reset. (3 phase require a seperate external overload to be incorporated).
AUTOMATIC FLOAT OPERATION
Standard on single phase motors to 750 watt, and selected models to 1500 watt. Above these sizes individual control panels for alternate starting and audible/visual warning systems are available.